Tuesday, March 3, 2015

Tie Dye Lab

Objective 

  • Use the process of dying fabrics to illustrate chemical reactions, equilibrium, chemical bonding, and pH.

Pre-lab Questions
1) Where did the art of dying fibers originate?
The art of dying fibers originated India, or China, approximately around 2500 B.C. 

2) Originally, what type of substances were used to dye?
Originally, natural substances that came from parts of berries were used to dye, such as, blueberries, black raspberries, and cranberries. In addition bark, flowers, leaves, and roots were also used.

3) What are the fibers of the shirt made of?
The fiber of the shirt are made out of cotton.

4) What chemical interaction is occurring when fibers are dyed?
The chemical interaction that is occurring when fibers are dyed is covalent bonding. For instance, a hydrogen atom is lost when the shirt pH is increased. The hydrogen atom is released and that is when the oxygen atom is able to form a bond with the dye molecule.

My Design:


History of Dyeing Fabrics
The art of dyeing clothing fibers originated in India or China no later than 2500 B.C. Most natural dyes came from parts of plants such as the bark, berries, flowers, leaves, and roots.

In 1856, William Henry Perkin began the synthetic organic chemical industry by accidentally discovering the purple dye, mauveine, when he tried to produce quinine from aniline.

About 100 years after Perkin’s first discovery, fiber-reactive dyes capable of forming covalent linkages with the fiber were discovered.

Chemistry of Dyeing Fabrics
Some dyes only stain the cloth, and wash out a little each time the cloth is laundered. High Quality dyes (fiber-active dyes) actually chemically (covalent) bond to the molecules of the fabric and can never be washed out. The dye molecules carry a “chromophore”, which absorb varying spectrums of light, allowing only certain spectrums to reflect.

Cotton is made of long strands of cellulose molecules, all twisted together. Cotton is ideal for dying because the fibers are naturally hollow, and the dye molecules will form bonds on both the inside and outside of the fiber. If you put molecules of dye and cotton together, very little will happen until the atoms on the surfaces of the molecules are prepared for bonding.

This can be done by either increasing the temperature or the pH of the fiber and dye. In this lab, we will do the latter, increasing the pH by soaking the fabric in calcium carbonate, which causes the releases a H atom from the cellulose molecule. The removal of the H atom leaves the cellulose molecule with some atoms that do not have stable octets. As a result, the dye can bond to the cellulose molecule at the site of the removed H atom.

After the dye is applied, it is allowed to react in a desirable host environment for up to 24 hours. After this time, the bonding sites on the cellulose should be saturated with dye molecules. Excess dye molecules that have not bonded permanently are washed away using warm water rinse and a dye-carrying detergent.

https://img1.etsystatic.com/000/0/6438975/il_fullxfull.346780639.jpg

Lab Safety Rules
1. Always wear safety glasses in the lab.

2. Wear disposable plastic gloves and aprons.

3. Don't get sloppy or squirt others with the dye solutions.

4. Use caution handling the solutions. These are strong chemicals that can be harmful.

Procedure
The point of tie dying is to prevent the dye from reaching the fabric evenly. Any place the dye can’t reach will stay white, or a lighter color. You can accomplish this by folding the fabric, tying it with string, using rubber bands

Step 1
With a permanent marker, write your name on the cloth you will be tie dying. There will be many other shirts in the lab during this activity; be sure yours is marked to avoid losing it.

Step 2
Soak your cloth in the hot water for about 5 minutes. Be sure you put it in the tub marked for your period.
http://cdn.instructables.com/F2V/1HIH/GZACIFP2/F2V1HIHGZACIFP2.MEDIUM.jpg

Step 3
Put on a pair of gloves, remove your cloth from the soaking tub and wring out. Using the below diagrams, tie you cloth in one (or a combination of) the methods shown using string or rubber bands.
http://static.labnews.co.uk/wp-content/uploads/2012/02/133306435.jpg


Step 4
Dye application. Apply the dye using the applicator bottles. Be aware that mixing will occur where the dyes come in contact with each other. Using complimentary colors (purple and yellows, blues and orange, or red and green) near each other usually produces a brownish black color. Also, the more dye you put on a given spot, the less white will remain on the final product.
http://i.ytimg.com/vi/hGldlCg4Sf4/0.jpg

https://littlecolormonster.wordpress.com/2012/07/02/tutorial-tie-dye-101/

Step 5
Place your dye-soaked item in a grocery or other plastic bag marked clearly with your name. No pooling of liquid should appear in the bag.
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhWnXjdiPpJAhMDFYSWEug19uSCoYRpBSyVQSIe9fyGWnbkA9qHoT_GZUfmFJ3_90WN8XR73fW1Ee4Ok9hYpmpL9_yLUsH15p0Z8pqpKyGpEc4tltYQhORv0oWyosMf3IC79VEftR2PfJ9P/s1600/DSC_1207.JPG

Step 6
After the cloth soaks for at least 24 hours, open the bag, remove the item, and rinse it several times with warm water, before removing strings or rubber bands. Once it is rinsing clean, remove the ties and rinse several times again until it is rinsing clean. At this point, you can hang it to dry or place it in another bag to take home and wash.
https://c2.staticflickr.com/8/7105/7072363433_3c7f12a1da_b.jpg

Step 7
After the shirt is dyed: 
The first time you wash it, place it alone in the washing machine with just a small squirt of dish washing liquid like Dawn or Joy. Do not use laundry detergent.
http://www.soyouwanna.com/images/tie-dye-instructions-kids-10951.jpg

Data
1.) Before dyeing the shirt I put my gloves on to prevent the dye coming onto my hands. In addition I wet my shirt in cold water. Then I rinse my shirt and I placed it on the table.

2.) When I was dyeing my shirt I decided to do the spiral pattern. I spread my wet shirt on the table to have more room for the pattern I've chosen. To start the pattern I placed my fingers in the middle of the shirt. Then I started to twist the whole shirt in circles until I got to the end. After that I grabbed some rubber bands to tie the shirt together. When I finished rubber banding the shirt I placed it in a ziploc bag.

3.)
After 24 hours my shirt came out with the spiral pattern; however, it had a lot of white in it. My shirt was lacking a lot of dye, but it was still precise. My shirt had purple, blue, red, yellow, and white. On the inner, or middle, of my shirt the spiral pattern starts with blue. Then it goes to red, purple, and yellow. Between each other colors there was white. My shirt looks like a snail shell, but with numerous colors. (My shirt below):


Post-Lab Questions
1. If you dyed a rainbow spiral on a shirt then soaked it in a black dye bath, the result would be a black shirt with a rainbow spiral pattern. Why doesn't the entire shirt dye black?
If I dyed a rainbow spiral on a shirt then soaked it in a black dye bath, the result would be a black shirt with a rainbow spiral pattern. The entire shirt didn't dye black because the black dye cannot be broken with the original bonds. However, the black dye can interact with the white areas of the shirt because the white spots hasn't formed a bond with the other dyes yet.


2. What is the purpose of soaking the shirts in the hot water for 5 minutes?
The purpose of soaking the shirts in hot water for 5 minutes was because it increased the pH.


3. Why is 100% cotton the best type of cloth to use with fiber
reactive dyes?
100% cotton is the best type of cloth to use with fiber reactive dyes because cotton fabric contains the most vibrantly color. Therefore it would hold the coloration (the dyes) longer and better than synthetic fabrics.

4. What are some advantages of fiber reactive dyes?
The advantages of fiber reactive dyes are long-lasting and brighter, more vibrant colors.

5. Explain how ionic bonding is used to dye the shirts in this lab.

Ionic bonding is used to dye the shirts when heating (that is why we placed the shirts in hot water for 5 minutes) the fibers. The bond between hydrogen and oxygen atoms has been broken, because of the heat, causing the oxygen atom to have a negative charge. However the dye molecule has a positive charge because oxide can bond with dye molecules.

Sources
http://www.pburch.net/dyeing/dyeblog/C1405331529/E20101013065013/index.html
http://www.highland.k12.in.us/cms/lib04/IN01001438/Centricity/Domain/434/tie_dye_flinn_instructions.pdf